White Blaze Equipment - Miscellaneous Equipment

Allis Chalmers HD6A Track Winch
Rubber Tracked Winch Truck, Inline 4 Cylinder Diesel Engine, 30” H X 96” W Push Blade, Draw Bar, Carco E3056 Winch Complete with 5/8 Cable and Swivel Hook. OAH 82.5”, OAL 188”, OAW 79”, 1720 hours.
Wholesale Priced at $14,500 US Funds

Refurbished 1986 Gradall 552-3S with 630 Hours
Rated 20,000 lbs @ 24” Load Center, 3 Section Telescopic Boom to 30’ of Lift, Hydraulic Quick Disconnect Carriage (14.5 – 80” min I/S to max O/S Fork Spread), 2.5” X 8” X 60” Long Forks, Load Line with Hook Block, Rebuilt Detroit 4-53 Diesel Engine, 2 Speed Power-Shift Transmission, 4 Function Hose Group and Trailer Light Package at Carriage, Cab with Heater, Work & Road Lights, Back Up Alarm, Fire Extinguisher, 9.00 - 20 Dual Drive Tires, 10.00 – 20 Steer Tires, 120” Wheelbase, OAH 102”, 96” Wide, OAL (Less Forks) 192” and 25,500 lbs.
Wholesale Priced at $79,500 US FUNDS

Model 44A – 400 Ton 4 Point Jack Lift System
February 2008 Model - Kubota propane powered (approx 60 hours), Retracted Height is 10’ with a Maximum Extended Height of 27’ 6”.
Wholesale Priced at $185,000 US Funds

Model 2080SC - 80 Ton 2 Point Jack Lift System
110V Self Contained Power, Retracted Height is 8’ with a Maximum Extended Height of 18’ 11”.
2 Sets Available - One with a Hydraulic Drive System.
Wholesale Priced from $55 – 60,000 US Funds

Model 2020SC - 20 Ton 2 Point Mini Jack Lift System
110V Self Contained Power, Retracted Height is 6’ with a Maximum Extended Height of 16’.
3 Sets Available – Two Complete with a Hydraulic Drive System.
Wholesale Priced from $33,500 – 45,000 US Funds

Model WBC15 – 7.5 Ton Walk Behind Crane
Kubota 3 cylinder Propane Engine, Hydrostatic Drive, 220* Slew Capability, -5 to +74* Boom Angle Range, High Performance Hydraulic Winch, 10 Ton Single Sheave Block with Anti-Two Block Safety Device, 16,346 lbs working weight and 11,622 lbs with counterweights removed.
Wholesale Priced at $130,500 US Funds

Custom Machinery Moving Skates
These custom machinery rollers are tested under real world conditions out in the work place. Our standard line has varied capacities from 12 to 100 tons that utilize high capacity tapered roller bearings and high stress-proof axle shafts with recessed grease fittings. Most models are offered with non-marking polyurethane or steel wheels, removable handles for use in tight places and some models are even offered with steer or tilt options. Customized rollers can be designed and quoted as well to fit your individual machinery moving needs.
Contact White Blaze Equipment for Price and Lead Time

Hoist FKS 20 Mechanical Riggers Boom with Storage Stand
40,000 lbs @ 24" Load Center, 92" Lowered Height with 48" Vertical Mechanical Extension, 55.5 – 91.5" Manual Pull Out Stinger, 5.5” Fork Shaft Mounting, Storage Stand, Lost Load Distance is 15.5”.
Wholesale Priced at $14,500 US Funds

75,000 lb Machinery Mover Cart
Deck is 6’ Wide by 8’ Long and sits 25” High. Rear Axle has 6 Tires and the Front Steer Axle with 50” Long Tow Bar has 4 Tires.
Wholesale Priced at $14,500 US Funds

Model 44A – 400 Ton 4 Point Jack Lift System
Factory Rebuilt in 2008 with New Kubota Dual Fuel (Propane & Gas) Powered Engines, Retracted Height is 10’ with a Maximum Extended Height of 27’ 6”, 120’ of Track (Four lengths @ 20’ and Four lengths @ 10’), Four “D Rings”, Two Lifting Beams (Usable Span Width 30’), Clevises (Eight @ 17t, Eight @ 25t, Eight @ 35t, Four @ 45t, Four @ 35t “Sling Savers” and Four @ 50 t “Sling Savers”) as well as Four of Each Continuous Length Slings at 4’, 6’, 8’ and 10’ Lengths.
Wholesale Priced at $198,950 US Funds

Used Mechanical 15 Ton Riggers Boom with Storage Stand
Was Used on a Taylor Cushion Rated 30,000 lbs @ 24" Load Center, 101" Lowered Height with 61" Vertical Mechanical Extension, 77.5 – 98.5" Manual Pull Out 3 Hole Clevis Rail Stinger, 3.75” Fork Shaft Type Mounting, Lost Load Distance is 10”.
Wholesale Priced at $7,500 US Funds